Active Optical Network and Passive Optical Network

Fiber to the home (FTTH) enables the installation of fiber directly from the central point to the end user's home, providing unprecedented high-speed Internet access. There are two types of technologies for implementing FTTH network: AON (active optical network) and PON (passive optical network).

What is AON?
AON is an Active Optical Network, which mainly uses a point-to-point (PTP) network architecture, and each user can have a dedicated optical fiber line. Active optical network means that during the transmission of signals, switching equipment such as routers and switching aggregators, active optical devices, etc. are deployed from the central office to the user distribution unit. These switching equipment are driven by electricity to manage Signal distribution and direction signals for specific customers. Active optical devices include light sources (lasers), optical receivers, optical transceiver modules, optical amplifiers (fiber amplifiers and semiconductor optical amplifiers), etc.

What is PON?
PON is Passive Optical Network, a point-to-multipoint network structure, and is the main technology to realize FTTB / FTTH. Passive optical network refers to ODN (optical distribution network) using only optical fibers and passive components, and only needs to use active equipment at the signal source and signal receiving end. In a typical PON system, the optical splitter is the core, and the optical splitter is used to separate and collect optical signals transmitted through the network. These splitters for PON are bidirectional. In the downstream direction, multiple services such as IP data, voice, and video are distributed by the OLT located in the central office through broadcast, and are distributed through the 1: N passive optical distributor in the ODN To all ONU units on the PON; in the upstream direction, various service information from each ONU is coupled to the same fiber through the 1: N passive optical combiner in the ODN without interference, and finally sent to the OLT at the central office for reception end.

A passive optical network includes an optical line terminal (OLT) installed at the central control office, and a set of supporting optical network units (ONUs) installed at the user end. The optical distribution network (ODN) between the OLT and the ONU contains optical fibers and passive splitters or couplers. PON is divided into three technical standards: APON (ATM PON) based on ATM, EPON (Ethernet PON) based on Ethernet, and GPON (Gigabit PON) based on General Frame Protocol.
In the AON network, users have dedicated optical fiber lines, which is easy for network maintenance, capacity expansion, and network upgrades. And AON network covers a wide range, covering a range of about 100 kilometers; PON networks are usually limited to fiber optic cables up to 20 kilometers. AON mainly guides optical signals through active equipment, and PON uses passive devices without power supply, resulting in AON network deployment higher than PON cost.

As a world leading manufacturer in fiber optic connectivity, plc splitter, wdm, MEMS optical switch, HYC has 20 years of experience to provide end-to-end solutions for FTTx, FTTH applications.

Quickly understand FTTx / FTTC / FTTB / FTTH

What is FTTx?
FTTx is "Fiber To The x", which is a general term for various fiber-optic communication networks. X based on the location of the fiber's termination point. Such as x = H (Fiber to the Home), x = O (Fiber to the Office) , x = B (Fiber to the Building). The FTTx technology ranges from the central office equipment to the user terminal equipment, including OLT (Optical Line Terminal), ONU (Optical Network Unit), ONT (Optical Network Terminal).

Depending on the install location of the ONU at the user end of the optical network unit, there are many types of FTTx, which can be divided into fiber to Cabinet (FTTCab), fiber to curb (FTTC), fiber to building (FTTB), fiber to the home (FTTH), fiber to the office (FTTO) and other service forms. US operator Verizon refers to FTTB and FTTH as fiber-to-the-station (FTTP).

FTTCab (Fiber To The Cabinet)
The traditional electric cable is replaced by optical fiber. The ONU is placed at the cabinet. The ONU below uses copper wire or other media to connect to the user.

FTTC (Fiber To The Curb)
Optical cables will be used from the central office to roadsides within a thousand feet of home or offices. Generally, a potential broadband transmission link that is very close to the user is laid first. Once there is a need for broadband services, the fiber can be quickly led to the user and the fiber can be brought home.

FTTB (Fiber To The Building)
It is a broadband access method based on optimized optical fiber network technology, which uses fiber to the building and network cable to the home to achieve the user's broadband access. Generally, dedicated line access is adopted, which is easy to install and can provide a maximum upstream and downstream rate of 10Mbps (exclusive).

FTTH (Fiber To The Home)
FTTH is a type of optical access network application that is closest to the user except the FTTD(Fiber to the Desktop) by installing the ONU in home or business users. PON technology has become a hotspot of global broadband operators, and is considered to be one of the best technical solutions to achieve FTTH.

FTTP (Fiber To The Premise)
FTTP is a North American term. It includes FTTB, FTTC, and FTTH in a narrow sense, and extends optical fiber cables to homes or enterprises.

HYC Co., Ltd（HYC）is a leading passive optical devices OEM ODM manufacturer engaged in R&D, manufacture, and marketing of fiber optical products. Providing professional products and services for fiber connectivity, WDM, PLC splitter, and high-density datacom cabling. HYC products and solutions widely applied in 4G/5G, Data Center and Cloud Computing industry, etc.
www.hyc-system.com